Browse all practice questions for the BNSF Local Employee Training Program (LETP) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

BNSF Local Employee Training Program (LETP) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • If a locomotive inspection reveals non-complying conditions, when can the locomotive be moved?
  • For which scenario is the Intermediate Air Brake Test (Class 1A) required?
  • Which component indicates that the air brake system is functioning properly during tests?
  • How long should you actuate the independent brake when initiating an automatic brake application?
  • When is it permissible to turn off the headlight of a train?
  • What role do simulations and practical exercises play in LETP?
  • Who should employees contact if they have concerns about the training program?
  • What is the significance of employee feedback in the LETP?
  • How does LETP ensure compliance with regulations?
  • What is the primary function of the Handle Off/Continuous Service setting?
  • What is the maximum independent brake cylinder pressure allowed on locomotives with clasp-type brake shoe rigging?
  • What is the maximum brake pipe reduction for speed control?
  • What kind of regulatory compliance is covered in LETP?
  • In the Air Flow Method, what must be done if the air flow exceeds 60 CFM?
  • What is the maximum allowable speed for a locomotive with a failed speed indicator to travel?
  • What are some common topics assessed in LETP evaluations?
  • What is one responsibility of trainers within the LETP?
  • What is the primary function of the regulating valve in a train brake system?
  • What must you check post movement of the locomotive at 1 to 3 MPH?
  • During the air brake test, what should you check after making a 10-psi brake pipe reduction?
  • What information must be specified to the engineer when using radio communication for shoving movement?
  • When must periodic Running Air Brake Tests be performed during inclement weather?
  • What is the maximum speed for shoving cars or engines on a controlled siding for freight trains?
  • When testing the speed indicator, what speed range should be used for accuracy checks?
  • According to Brake Pipe Leakage Method procedures, what is the allowable leakage for the test to be considered complete?
  • What should trainees prioritize according to LETP regarding their behavior?
  • When is a train considered delayed in block?
  • Which of the following represents the minimum radio communication requirements during shoving movements?
  • Which action could lead to crew decertification?
  • Why is collaboration emphasized in LETP training?
  • What is an outcome of effective communication emphasized in LETP?
  • When is a locomotive air brake test required on multiple-unit consists?
  • What method is utilized for hands-on training in LETP?
  • What is one factor that does NOT contribute to the requirement of hand brakes on cars?
  • During an emergency brake application, what should be done with the independent brake handle?
  • What is the first step in responding to a yellow-red flag?
  • What speed must a train not exceed if there is a loss of front to rear communication while enroute?
  • Which aspect of LETP helps in maintaining workplace safety?
  • How is the effectiveness of LETP training evaluated?
  • What is required when a train is moving in the opposite direction from which the block was entered?
  • What is the expected outcome of completing the LETP?
  • What is a potential issue indicated by windshield wipers not functioning?
  • Who is responsible for implementing the LETP?
  • What is the focus of refresher courses in LETP?
  • Which issue is related to operational safety when cars have been off air for more than 24 hours?
  • Why is it vital for BNSF employees to understand emergency response actions?
  • What is the generally acceptable change in psi needed to confirm either application or release of the brakes at the rear of the train?
  • What is a sign of improper equipment maintenance in a single locomotive?
  • What must be done if a train is advised of working limits behind them?
  • Why does BNSF invest in the LETP program?
  • What are the steps after attaching a locomotive to a train previously tested with yard air?
  • How does LETP promote a culture of safety among employees?
  • What action should be taken if flat spots of 2 inches or more are found on a locomotive's wheels?
  • What must crew members provide during shoving movements unless relieved by specific instructions?
  • When initially moving a locomotive consist coupled to other equipment, what occurs if braking is detected on trailing locomotives?
  • If the signal giver for shoving a train disappears, what should employees do?
  • What must a crew do if a helper locomotive is added to a train?
  • After reducing brake pipe pressure by 20 psi, how long must you wait before monitoring for leakage?
  • When is a brake pipe leakage test required?
  • At what speed must a locomotive have an operative speed indicator?
  • What should be done when your train is stopped and operating conditions allow, before releasing the brakes?
  • What is required during reverse movements within the same signaled block?
  • How long should the actuating procedure be on a trailing locomotive during initial movement?
  • What key principle is emphasized in BNSF's safety culture?
  • How must trains operate when within view of another train under restricted speed?
  • In ABS territory, how should a train enter the main track from a siding after authority has been obtained?
  • What must a train ensure when moving from a controlled area to an uncontrolled area?
  • What should employees do if they identify a safety hazard?
  • What is the purpose of the Local Employee Training Program (LETP)?
  • What is the first action taken when the automatic HO is applied during inbound train inspection?
  • How should multiple brake pipe reductions be spaced during operation?
  • What action is taken before cutting out operating controls on a locomotive?
  • What is the procedure if a red flag is displayed?
  • When should the automatic brake valve be cut out?
  • During which weather conditions is a Running Air Brake Test particularly crucial?
  • What must be closely observed to determine if any leakage occurs in the brake system?
  • What defines "disturbed track"?
  • What are “job aids” in the context of LETP?
  • What should a train do if it stops or its speed is reduced below 10 mph after entering a block on a proceed indication in ABS Territory?
  • Which method is commonly used for assessing knowledge retention in LETP?
  • What is the main goal of safety training in LETP?
  • When yard limits fall within CTC territory, how is movement authorized on the main track?
  • What scenario triggers the need for an Application and Release Air Brake Test (Class 3)?
  • What is the standard brake pipe pressure for yard or freight service?
  • What is the indication for sounding the whistle signal (7) when approaching public crossings?
  • On what types of tracks may a single car be left unattended?
  • What is a key benefit of participating in LETP training?
  • Why is feedback important in LETP training?
  • How can employees contribute to the content of the LETP?
  • In the context of train operations, what do buff forces indicate?
  • In a fully charged system, what should the initial brake pipe reduction be?
  • What is the independent brake cylinder pressure for a single shoe type?
  • What is a critical component of the LETP for new hires?
  • What must be done first during an inbound train inspection?
  • What goal does BNSF strive for in their LETP regarding environmental practices?
  • When should a defective speed indicator be reported?
  • In the context of LETP, what is the significance of scenario-based evaluations?
  • What constitutes a safety risk in relation to cab seats?
  • What does BNSF stand for?
  • What are the primary factors determining the number of cars requiring hand brakes?
  • What is the limit speed when a locomotive has flat spots that meet specific criteria?
  • What type of operations does the LETP address?
  • What is required of the lead controlling locomotive for dynamic brakes to function properly?
  • Which locomotives should have independent brakes cut-in?
  • During a Transfer Train Air Brake Test, what is the minimum brake system pressure required before making a brake pipe reduction?
  • What must be included in the written or electronic record of the Air Brake Test?
  • What is an appropriate action when there is a ground relay tripped?
  • What should be activated during an emergency to stop the train?
  • What system component is crucial for controlling brake pipe pressure?
  • What action should be taken after stopping and waiting for freight car vent valves to close?
  • What should a train do if the previous indication is unknown?
  • What is the first step in conducting a locomotive air brake test?
  • How far from an interlocking signal must a train continue to move prepared to stop?
  • What type of training might be included for locomotive engineers in LETP?
  • What is the first step in the reducing locomotive overcharge procedures?
  • How are the objectives of the LETP communicated to employees?
  • What type of skills does the hands-on training portion of LETP develop?
  • How frequently is LETP content reviewed and updated?
  • What type of skills does LETP aim to enhance among employees?
  • What must you check for during the initial movement of a locomotive that is not coupled to other equipment?
  • What learning styles does LETP aim to accommodate?
  • Under what condition can a train back up on any main track to pick up a crew member?
  • What should a crew do if they detect flat spots while moving?
  • How is the automatic brake valve handled during the leakage test?
  • In what manner does LETP promote diversity and inclusion among employees?
  • If no crossing sign is visible, when should the whistle signal be sounded?
  • What can employees expect after completing LETP training?
  • When making split brake pipe reductions for planned slowdowns, what should the initial reduction be?
  • What is the initial reduction in psi for a proper split reduction when slowing down a train?
  • How often must employees participate in LETP training?
  • How should a train proceed when its speed is reduced below 25 mph while approaching an automatic interlocking?
  • What is the significance of continuing education in LETP?
  • How long must brakes remain applied to pass a retest of the Transfer Train Air Brake Test?
  • Which dynamic brake system is known to provide braking power relative to speed and dynamic handle position?
  • What is the importance of teamwork in the LETP?
  • What situation necessitates a Class 3 air brake test?
  • Draft forces are present when a train is in which condition?
  • Which condition is considered a safety hazard while trailing with cars?
  • How should movements be made if a train is moving in the opposite direction from which the block was entered?
  • What indicates that windshield cracks are a safety concern?
  • What is the maximum allowable speed deviation during a speed indicator check at speeds below 30 MPH?
  • Which of the following enhances decision-making regarding safety in LETP?
  • What are the consequences of failing to complete LETP requirements?
  • What is the role of the supervisor in the LETP?
  • What action must a train take after entering a block on a proceed indication in CTC or manual interlocking limits when its speed is reduced below 10 mph?
  • What is the required action for a train when taking siding?
  • Which defect can be identified in the brake system of a single locomotive?
  • What is the maximum independent brake cylinder pressure allowed on a locomotive with single shoe per wheel brake rigging?
  • When determining the number of hand brakes needed, which factor is considered?
  • Which of the following reflects the training approach used in LETP?
  • What follows a full service brake pipe reduction when the automatic brake is applied?
  • What is the procedure for reporting a training completion?
  • What might suggest inefficiency in speed indicators?
  • What action should be taken if a penalty brake application does not occur during an Alerter Test?
  • In what way does LETP contribute to environmental awareness?
  • What is the BNSF commitment to diversity and inclusion within LETP?
  • What must be obtained before making reverse movements on controlled tracks?
  • What is the first step in reducing pressure in overcharged train brake systems?
  • What is the purpose of actuating the independent brake valve before a brake pipe reduction?
  • When should the whistle signal (8) be used?
  • Which of the following is NOT a reason for performing a brake pipe leakage test?
  • How long should one wait after stopping before placing the auto brake valve handle in the release position?
  • What is the maximum speed for shoving cars or engines on a controlled siding for passenger trains?
  • In which scenario can the headlight be dimmed?
  • What is the minimum distance a train should stop from a signal when taking siding?
  • How should reverse movements on a main track be conducted?
  • How long must the brakes remain applied during a retest for a car that released its brakes prematurely?
  • If a train is delayed in block in ABS territory, what is the next course of action?
  • What should be done after making a brake pipe exhaust stop during pressure reduction?
  • In dynamic braking, what percentage of maximum retarding force should be applied when passing disturbed track areas?
  • What type of forces are present when a train is in a slack-bunched condition?
  • If a train is delayed in a block, what is the required action according to procedures?
  • What procedure is required when leaving a portion of a train temporarily on the main track?
  • What indicates that the Air Flow Method test is complete?
  • Which of the following trains must undergo a Running Air Brake Test?
  • If a locomotive has flat spots on wheels longer than 2 1/2 inches, what action should be taken?
  • What signifies a need to sound the whistle intermittently after the initial warning signal (8)?
  • What is one of the training goals for maintenance-of-way employees in LETP?
  • What should a train do when it enters a block with no governing signal according to procedures?
  • What must trains obtain within yard limits to use the main track?
  • What is the proper handling of the dynamic brake handle in restricted areas?
  • What is a common form of assessment after LETP training units?
  • What is the acceptable pressure range for the main reservoir?
  • How are emergency procedures integrated into LETP training?
  • What should an employee do if a red flag is not displayed?
  • What characterizes an "inverse" gradient in train braking?
  • At what speed must a train proceed if the previous signal indication is unknown?
  • How long must a crew retain mandatory directives, including voided ones?
  • Why is it necessary to ensure all angle cocks are left open on standing portions of a train?
  • How must movements entering yard limits be made?
  • Under what condition should an emergency brake application be used?
  • What must happen for train operations to resume after a yellow-red flag situation?
  • What should employees do to prepare for the LETP sessions?
  • What is an appropriate response to a near-miss incident reported during LETP training?
  • What is the purpose of the brake pipe reduction during a Running Air Brake Test?
  • When should a train operator notify maintenance regarding wheel flats?
  • What action should be taken if there is a main track obstruction while returning to a detached portion?
  • What should a train do if it is delayed in block in CTC or manual interlocking limits?
  • What is the maximum allowable brake pipe pressure for trains consisting entirely of business or passenger cars?
  • What is the first step to conduct an Air Flow Method (AFM) test?
  • How does the LETP support career advancement?
  • Which of the following is NOT considered a non-complying condition for locomotives?
  • How long should the independent brake valve be actuated prior to a brake pipe reduction?
  • What common scenarios are practiced during LETP simulations?
  • What must the lead locomotive be equipped with on train movements requiring dynamic brakes?
  • What is meant by initiating movement between signals?
  • How should a train proceed when it enters a block with no governing signal?
  • True or False: Any object waived violently by a person near the track is a signal to stop.
  • How long before reaching a railroad crossing should the throttle be reduced?
  • What does the term "normal" gradient refer to in train brake systems?
  • When must a train proceed prepared to stop at the interlocking signal while approaching an automatic interlocking?
  • What role does technology play in the LETP?
  • What initial step must be taken during an Intermediate Air Brake Test?
  • What is required to maintain slack condition while stopping?
  • How long must the brake valve handle be in the suppression position to recover control after a penalty brake application?
  • What is the acceptable range of speed deviation for a speed check above 30 MPH?
  • What is the maximum braking psi when in the Full Service Position?
  • What should be assessed during an inspection of a speed indicator?
  • At which throttle position does the flat dynamic brake system reach full braking power?
  • What are the two acceptable methods for testing the brake system for leakage?
  • What does the Full Service Position do to the equalizing reservoir and brake pipe pressures?
  • What importance does LETP place on an employee's personal behavior?
  • Which of the following pressures are equalized during an emergency brake application on a freight car?
  • What is a key focus area for freight train operations training in LETP?
  • What is the required air test before putting a train together at its initial terminal?
  • When charging the air brake system, which of the following is a key point to remember?
  • Which document outlines the safety procedures for BNSF employees?
  • What should a train do if it needs to pick up a crew member without entering yard limits?
  • How does LETP foster leadership skills among employees?
  • Why is understanding company policies crucial in the LETP program?
  • What action should be taken during a full service brake application?
  • When is it acceptable to sound the whistle signal less than 15 seconds before a crossing?
  • What valve maintains the desired pressure in the brake pipe when the automatic brake handle is in the RELEASE position?
  • What is the desired action when stopping a train from an emergency brake application?
  • What is the role of accountability in LETP training?
  • What is one major benefit of online training modules in LETP?
  • Which of the following is NOT part of the steps to restore operating controls?
  • What is the appropriate response if an engineer finds the speed is not accurate by the set limits during a check?
  • What is the first step in the cutting off and recouping airbrake test?
  • What safety equipment must be worn during the LETP training exercises?
  • Under which condition can the speed be increased when a yellow-red flag is present?
  • What is indicated by one defective headlight on a vehicle?
  • When the automatic brake valve handle is in the release position, where is air for charging supplied from?
  • What action should be taken if the whistle fails during operation?
  • According to the procedures, what is the first verification after making an initial locomotive movement?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy